PDA

View Full Version : Boston Micromachines' New Deformable Mirror To Enhance Retinal Imaging Systems For



Medical Videos
03-30-2007, 01:01 PM
Boston Micromachines' New Deformable Mirror To Enhance Retinal Imaging Systems For Earlier Detection Of Leading Eye Diseases


Boston Micromachines Corporation (BMC), a leading provider of MEMS-based deformable mirror (DM) products for adaptive optics (AO) systems, today announced it has manufactured an enhanced DM capable of meeting the criteria for ultra-high resolution retinal imaging, which is necessary for early detection of ocular diseases. The new mirror will meet the demanding requirements of both OEM retinal imaging systems as well as vision science and microscopy researchers who use AO for biological imaging.

"This new deformable mirror represents a significant scientific advancement in the field of biological imaging, specifically vision science. Until now doctors were limited in their ability to gain a clear view of the human retina due to image distortion caused by tissue-induced wavefront aberration. Our deformable mirror corrects for that wavefront aberration," said Paul Bierden, president of Boston Micromachines. "This marked improvement in retinal imaging will provide doctors the technology necessary to detect the leading diseases of the eye: glaucoma, diabetic retinopathy, and age-related macular degeneration years earlier than previously possible. Earlier detection will result in earlier diagnosis and earlier treatment."

The new mirror, which is an enhanced version of Boston Micromachines' flagship product the Multi-DM, delivers increased stroke while maintaining the high resolution afforded by its 140 independently controlled actuators. The mirror's 3 kilohertz frequency capability allow for high speed real-time imaging with a 6mm aperture perfectly suited for a dilated pupil. In addition, the new Multi-DM also provides the wavefront amplitude correction needed for older eyes by offering 6 microns of stroke. This translates to 12 microns of wavefront correction, the most wavefront correction demonstrated by any MEMS DM on the market today. The development work on this MEMS device was partially funded by the Center for Adaptive Optics, a NSF Science and Technology Center, and by a National Eye Institute Phase I SBIR.

The improved Multi-DM will also enable enhancements in other biological imaging areas. Biological imaging instruments often suffer from resolution limitations, constraining the ability of researchers and clinicians to detect critical detail. This loss in resolution is due to the wavefront aberrations induced by the tissue media through which light passes to reach the object of interest, such as a cell, retina, or tumor. The Multi-DM's ability to actively correct for these aberrations will restore resolution and enable the extracting of vital information from biological specimens.

"The ever increasing strokes in deformable mirrors, such as the 6um achieved with BMC's new Multi-DM, will allow for deeper AO corrected imaging in biological specimens, more effective correction when used at longer wavelengths, and improved performance specifications in systems such as the Adaptive Scanning Optical Microscope (ASOM) and other AO based imaging systems," said Ben Potsaid, Research Scientist at the Center for Automation Technologies and Systems (CATS) located at Rensselaer Polytechnic Institute (RPI).

"Commercial systems require low cost DMs. Never before has there been a compact, affordable DM available with this magnitude of resolution. Ours is the only technology that meets the criteria of resolution, speed, size, stroke," said Bierden. "This will enable adaptive optics to become a reality for commercial instruments."

About the Multi-DM

The Multi-DM is the flagship product in Boston Micromachines' award- winning suite of MEMS deformable mirrors, which are used to improve resolution in microscopes, telescopes, and ophthalmic instruments. The popular and versatile Multi-DM offers sophisticated aberration compensation in an easy-to- use package. Typical applications include advanced retinal imaging systems, laser communication and beam forming.

At Photonics West

Boston Micromachines will be demonstrating the new Multi-DM at Photonics West 2007 (January 20-25) in San Jose, California, at Booth 6180.

Availability

The new Multi-DM is available immediately.

About Boston Micromachines Corporation

Founded in 1999, Boston Micromachines Corporation (BMC) is the leading provider of advanced MEMS-based mirror products for use in commercial AO systems, applying wavefront correction to produce high resolution images of the human retina and enhance images blurred by the Earth's atmosphere. The company's suite of award-winning compact DM products are the most economical high-performance mirrors in the market today. They are widely used in vision science applications such as advanced optic retinal imaging, long range laser communications and astronomy, including NASA's search for planets in other solar systems. Customers include leading manufacturers of optical imaging and communication systems, governmental agencies and contractors and vision science research laboratories worldwide, such as NASA, UCal Berkeley, Lockheed Martin and Boston University. Located in Watertown, Mass., BMC is privately held and also offers custom design-manufacturing services. For more information on BMC, please visit http://www.bostonmicromachines.com.

Boston Micromachines Corporation
http://www.bostonmicromachines.com